SWPS hos Weld IT

Med en Standard Welding Procedure Specification (SWPS) kan du komme raskt i gang med sveising – uten å bruke mye tid og et stort budsjett på å kvalifisere en egen prosedyre. Weld IT har over 100 WPQR i porteføljen, som vi kan utstede som SWPS på.

For mange prosjekter er dette betydelig rimeligere enn å kvalifisere selv, og du får samtidig en trygg, gjennomprøvd prosedyre som er enkel å ta i bruk i produksjon.

Kontakt oss for en prat

Derfor velger bedrifter SWPS

Raskere oppstart – klar prosedyre uten lang kvalifiseringsprosess
Lavere kostnad – mye rimeligere enn egen WPQR/WPS-kvalifisering
Trygg kvalitet – dokumenterte rammer for prosess, materialgruppe, tykkelsesområde m.m.
Hjelp til å velge riktig – vi finner riktig SWPS til ditt prosjekt og bruksområde

Trenger du noe som ikke dekkes av SWPS?

Hvis prosjektet ditt krever en løsning utenfor SWPS-området, kan vi også hjelpe deg med å kvalifisere egen WPQR og etablere riktig WPS tilpasset dine prosjektbehov.

Ta kontakt i dag – Usikker på om du kan benytte SWPS i ditt prosjekt, kan du gjerne sende oss spørsmål via skjema under for en avklaring

Se video: Hva er SWPS

Se våre SWPS

SVEISEMETODE 136 OG 135, MATERIALGRUPPE 8.1

WPQR No.	Methodology	Welding position	Connection	Additive material	Base material	P/T	Approval area for D	Approval range for material thicknesses
WI.P-101	135	All (-PG)	FW	Lincoln MIG-316LSi	8.1 / 8.1	P		6mm - 24mm
WI.P-102	135	All (-PG)	BW	Lincoln MIG-316LSi	8.1 / 8.1	P	≥500 (>150 PC- PF and PA rotated)	3mm - 24mm
WI.P-105	136	PB	FW (sl)	Hyundai SW-316L Cored	8.1	P/T	≥ 40mm	3mm - 12mm / 3mm - 24mm
WI.P-106	136	PB	BW (ds)	Hyundai SW-316L Cored	8.1	P	≥500 (>150 PC- PF and PA rotated)	3mm - 12mm
WI.P-108	136	PA	BW	Hyundai SW-316L Cored	8.1	P	≥500 (>150 PC- PF and PA rotated)	3mm - 12mm
WI.P-116	136	All (-PG)	BW	Hyundai SW-316L Cored	8.1 / 8.1	P	≥500 (>150 PC- PF and PA rotated)	P 7,5mm- 30mm
WI.P 117 MR	136	All (-PG)	FW	SW-309MoL Cored	8.1 / 1.2	P	≥500 (>150 PC- PF and PA rotated)	P 3mm - 24mm
WI.P 117 SR	136	All (-PG)	FW	SW-309MoL Cored	8.1 / 1.2	P	≥ (>150 PC- PF og PA rotert)	P 3mm - 24mm

WELDING METHOD 141, MATERIAL GROUPS 1.2 AND 8.1

WPQR No.	Methodology	Welding position	Connection	Additive material	Base material	P/T	Approval area for D	Approval range for material thicknesses
WI.T-001	141	All (-PG)	BW	Lincoln Electric LNT 25	1.2 / 1.2	T	≥ 30mm	2mm - 6mm
WI.T-002	141	All (-PG)	BW	Lincoln Electric LNT 25	1.2 / 1.2	T	≥30mm	3mm - 22mm
WI.T.-006	141	H-L045	BW	Fliess WSG 2	1.2	P	≥15	1,5mm - 6mm
WI.T-103	141	All (-PG)	BW	Lincoln Electric LNT 316LSi	8.1 / 8.1	T	≥ 24mm	3mm - 12mm
WI.T-104	141	All (-PG)	BW	Lincoln Electric LNT 316LSi	8.1 / 8.1	T	≥ 11mm	1mm - 3mm
WI.P-104	141	PB	FW (ml)	ESAB OK Tigrod 316LSi	8.1	P/T	≥21	3mm - 12mm / 3mm - 6,5mm
WI.P-105	141	PB	FW	ESAB OK Tigrod 316LSi	8.1	P	≥500 (>150 PC- PF and PA rotated)	2mm - 4mm
WI.P-106	141	PB	FW, MR, 45	ESAB OK Tigrod 316LSi	8.1	T/P	≥20	3mm - 24mm (P) - 3mm - 12mm (T)
WI.P-109	141	PB	FW/SRB/P, MR	Hyundai SMT-316LSi Stainless steel	8.1	P	≥5	3mm - 24 mm
WI.P-111	141	PB	FW	LNT 316LSi	8.1	P/T	≥15	T 3mm - 12mm P 3mm - 16mm
WI.P-112	141	PB	FW	LNT 316LSi	8.1	P/T	≥15	T 3mm - 12mm P 3mm - 16mm
WI.P-114	141	All (-PG)	FW	LNT 316LSi	8.1 / 8.1	P/T	≥44,45	T 3mm - 22mm P 3mm - 24mm
WI.T-102	141	All (-PG)	BW	OK Tigrod 316LSi	8.1 / 8.1	T	≥24,15	1,39mm - 5,54mm

WELDING METHOD 135, MATERIAL GROUP 1.2

WPS No.	Methodology	Welding position	Connection	Additive material	Base material	P/T	Approval area for D	Approval range for material thicknesses
WI.P-009	135	All (-PG)	BW	UltraMag	1.2 / 1.2	P	≥500 (>150 PC- PF and PA rotated)	3mm - 24mm
WI.P-010	135	All (-PG)	FW	UltraMag	1.2 / 1.2	P		5mm - 20mm

WELDING METHOD 111, HIGH YIELD ELECTRODE, MATERIAL GROUP 1.2

WPS No.	Methodology	Welding position	Connection	Additive material	Base material	P/T	Approval range for material thicknesses
WI.P-013	111	PB	FW	LE FERROD 165A	1.2 / 1.2	P	5mm - 50mm

WELDING METHOD 111, MATERIAL GROUP 1.2

WPS No.	Methodology	Welding position	Connection	Additive material	Base material	P/T	Approval area for D	Approval range for material thicknesses
111-03	111	All (-PG)	FW	Oerlikon Spezial	1.2 / 1.2	P/T	≥ 40mm	3mm - 24mm
WI.P-003	111	All (-PG)	FW	Conarc 49C	1.2 / 1.2	P		6mm - 24mm
WI.P-003 SL	111	All (-PG)	FW (sl)	Conarc 49C	1.2 / 1.2	P		6mm - 24mm
WI.P-004 SL	111	PG	FW (sl)	THE BASO 26V	1.2 / 1.2	P		6mm - 24mm
WI.P-005	111	All (-PG)	FW	BASO 120	1.2 / 1.2	P		5mm - 50mm
WI.P-006	111	All (-PG)	BW	BASO 120	1.2 / 1.2	P	≥500 (>150 PC- PF and PA rotated)	3mm - 24mm
WI.P-011 SL	111	All (-PG)	FW (sl)	BASO 120	1.2 / 1.2	P		4mm - 16mm
WI.P-007	111	All (-PG)	FW	BASO 48SP	1.2 / 1.2	P		5mm - 50mm
WI.P-008	111	All (-PG)	BW	BASO 48SP	1.2 / 1.2	P	≥500 (>150 PC- PF and PA rotated)	3mm - 24mm
WI.P-018 SL	111	All (-PG)	FW (sl)	NST E 7016	1.2 / 1.2	P/T	≥ 40mm	4mm - 16mm
WI.P-019	111	All (-PG)	BW	NST E 7016	1.2 / 1.2	P	≥500 (>150 PC- PF and PA rotated)	3mm - 24mm
WI.P-034 SL	111	PB	FW, SR	ESAB OK 48.08	1.2	T/P	≥57,15	3mm - 24mm (P) / 3mm - 22.2mm (T)
WI.P-034 ML	111	PB	FW, MR	ESAB OK 48.08	1.2	T/P	≥57,15	3mm - 24mm (P) / 3mm - 22.2mm (T)
WI.T-003	111	All (-PG)	BW	BASO 120	1.2 / 1.2	T	≥ 60mm	3mm - 22mm
111-BSC-1	111	All (-PG)	BW	Hyundai S-7016.O	1.2 / 1.2	T	≥ 50mm	3mm - 24mm
LCR-BW-111	111	All (-PG)	BW	Hyundai S7016.O	1.2 / 1.2	T	≥ 50mm	7.5mm - 30mm
LCR-FW-111	111	All (-PG)	FW (sl)	Hyundai S7016.O	1.2 / 1.2	P/T	≥60mm	3mm - 24mm /9mm - 36mm
2-111-12-PC+PF-Böhler FOX EV50	111	All (-PG)	BW	Böhler FOX EV 50	1.2 / 1.2	P	≥500 (>150 PC- PF and PA rotated)	3mm - 24mm
037-FW-MR	111	All (-PG)	FW	Magmaweld ESB 44	1.2 / 1.2	P/T	≥40	T 3mm - 16mm P 3mm - 24mm
037-FW-SR	111	All (-PG)	FW	Magmaweld ESB 44	1.2 / 1.2	P/T	≥40	T 3mm - 16mm P 3mm - 24mm
WI.P-040 MR	111	All (-PG)	FW	Oerlikon Spezial	1.2 / 1.2	P/T	≥40	T 3mm - 16mm P 5mm - 40mm
WI.P-040 MR	111	All (-PG)	FW	Oerlikon Spezial	1.2 / 1.2	P/T	≥40	T 3mm - 16mm P 5mm - 40mm

WELDING METHOD 138/136, MATERIAL GROUP 1.2

WPS No.	Methodology	Welding position	Connection	Additive material	Base material	P/T	Approval area for D	Approval range for material thicknesses
WI.P-016	138/136	All (-PG)	BW	NSSW SF-3A	1.2 / 1.2	P	≥500 (>150 PC- PF and PA rotated)	3mm - 24mm
WI.P-017	138/136	All (-PG)	BW	NSSW SF-3A	1.2 / 1.2	P	≥500 (>150 PC- PF and PA rotated)	20mm - 50mm
WI.P-021	138	All (-PG)	FW	NSSW SM-3A	1.2 / 1.2	P/T	≥ 60mm	5mm - 50mm/3mm - 22mm
WI.P-024	138	PB	FW	SM-3A	1.2	P/T	≥ 67 (90 to 45 degrees)	3mm - 27mm / 3mm - 3mm - 32mm
WI.P-025	138/136	PF / PC	BW	SM-80A / SF-80A	1.2	P	≥500 (>150 PC- PF and PA rotated)	3mm - 24mm
WI.P-030	138	PB	FW, MR,SR	SM-3A	1.2	T/P	≥10	≥ 5mm (P)
WI-P-031	136	PC &AMP; PF	BW	Hyundai SC-71LHM Cored	1.2	P	≥500 (>150 PC- PF and PA rotated)	3mm - 24mm
WI.P-032 FW sl	136	PB &AMP; PH	FW, SR	Hyundai SC-71LHM Cored	1.2	T/P	≥57,15	3mm - 24mm (T) / ≥ 5mm (P)
WI.P-032-FW-ML	136	PB &AMP; PH	FW, MR	Hyundai SC-71LHM Cored	1.2	T/P	≥57,15	3mm - 24mm (T) / ≥ 5mm (P)
WI.P-035	138/136	PC &AMP; PF	BW	Hyundai SC-70A/ Hyundai SC-71LHM Cored	1.2	P	≥500 (>150 PC- PF and PA rotated)	15mm -60mm
WI.T-004	138/136	K-Lo45	BW	LE Outershield MC710-H / 71E-H	1.2	T	≥ 57	3mm - 22mm
WI.T-005	138/136	H-L045	BW	Hyundai SC-71LHM Cored / Hyundai SC-70A	1.2	T	≥57,15	3mm - 24 mm
LCR-138/136	138/136	All (-PG)	BW	SC 70T Cored / 71 LHM	1.2 / 1.2	T	≥ 50mm	7.5mm - 30mm
2-30-PA-HL51TMC	138	PA	BW	Böhler HL 51 T-MC	1.2 / 1.2	P	≥500 (>150 PC- PF and PA rotated)	15mm - 30mm
2-12-PA-HL51TMC	138	PA	BW	Böhler HL 51 T-MC	1.2 / 1.2	P	≥500 (>150 PC- PF and PA rotated)	3mm - 24mm
2-12-PC+PF-HL51TMC-Ti52TFD	138/136	All (-PG)	BW	Böhler HL 51 T-MC / Ti 52 T-FD	1.2 / 1.2	P	≥500 (>150 PC- PF and PA rotated)	3mm - 24mm
F-2-12-PA-HL51TMC	138	PA	FW	Böhler HL 51 T-MC	1.2 / 1.2	P		3mm - 24mm
WI.P-039	138	All (-PG)	BW	NST SM-3A	1.2 / 1.2	P	≥500 (>150 PC- PF and PA rotated)	P 3mm - 24mm

WELDING METHOD 136 AND 135/136, MATERIAL GROUP 1.2

WPS No.	Methodology	Welding position	Connection	Additive material	Base material	P/T	Approval area for D	Approval range for material thicknesses
WI.P-016	138/136	All (-PG)	BW	NSSW SF-3A	1.2 / 1.2	P	≥500 (>150 PC- PF and PA rotated)	3mm - 24mm
WI.P-017	138/136	All (-PG)	BW	NSSW SF-3A	1.2 / 1.2	P	≥500 (>150 PC- PF and PA rotated)	20mm - 50mm
WI.P-021	138	All (-PG)	FW	NSSW SM-3A	1.2 / 1.2	P/T	≥ 60mm	5mm - 50mm/3mm - 22mm
WI.P-024	138	PB	FW	SM-3A	1.2	P/T	≥ 67 (90 to 45 degrees)	3mm - 27mm / 3mm - 3mm - 32mm
WI.P-025	138/136	PF / PC	BW	SM-80A / SF-80A	1.2	P	≥500 (>150 PC- PF and PA rotated)	3mm - 24mm
WI.P-030	138	PB	FW, MR,SR	SM-3A	1.2	T/P	≥10	≥ 5mm (P)
WI-P-031	136	PC &AMP; PF	BW	Hyundai SC-71LHM Cored	1.2	P	≥500 (>150 PC- PF and PA rotated)	3mm - 24mm
WI.P-032 FW sl	136	PB &AMP; PH	FW, SR	Hyundai SC-71LHM Cored	1.2	T/P	≥57,15	3mm - 24mm (T) / ≥ 5mm (P)
WI.P-032-FW-ML	136	PB &AMP; PH	FW, MR	Hyundai SC-71LHM Cored	1.2	T/P	≥57,15	3mm - 24mm (T) / ≥ 5mm (P)
WI.P-035	138/136	PC &AMP; PF	BW	Hyundai SC-70A/ Hyundai SC-71LHM Cored	1.2	P	≥500 (>150 PC- PF and PA rotated)	15mm -60mm
WI.T-004	138/136	K-Lo45	BW	LE Outershield MC710-H / 71E-H	1.2	T	≥ 57	3mm - 22mm
WI.T-005	138/136	H-L045	BW	Hyundai SC-71LHM Cored / Hyundai SC-70A	1.2	T	≥57,15	3mm - 24 mm
LCR-138/136	138/136	All (-PG)	BW	SC 70T Cored / 71 LHM	1.2 / 1.2	T	≥ 50mm	7.5mm - 30mm
2-30-PA-HL51TMC	138	PA	BW	Böhler HL 51 T-MC	1.2 / 1.2	P	≥500 (>150 PC- PF and PA rotated)	15mm - 30mm
2-12-PA-HL51TMC	138	PA	BW	Böhler HL 51 T-MC	1.2 / 1.2	P	≥500 (>150 PC- PF and PA rotated)	3mm - 24mm
2-12-PC+PF-HL51TMC-Ti52TFD	138/136	All (-PG)	BW	Böhler HL 51 T-MC / Ti 52 T-FD	1.2 / 1.2	P	≥500 (>150 PC- PF and PA rotated)	3mm - 24mm
F-2-12-PA-HL51TMC	138	PA	FW	Böhler HL 51 T-MC	1.2 / 1.2	P		3mm - 24mm
WI.P-039	138	All (-PG)	BW	NST SM-3A	1.2 / 1.2	P	≥500 (>150 PC- PF and PA rotated)	P 3mm - 24mm

WELDING METHOD 131, MATERIAL GROUP 22.3

WPS No.	Methodology	Welding position	Connection	Additive material	Base material	P/T	Approval area for D	Approval range for material thicknesses
WI.P-001	136	All (-PG)	FW	LE Outershield 71E-H	1.2 / 1.2	P		5mm - 50mm
WI.P-002	135/136	All (-PG)	BW	UltraMag L.P K300 / LE Outershield 71E-H	1.2 / 1.2	P	≥500 (>150 PC- PF and PA rotated)	3mm - 24mm
WI.P-014	136	All (-PG)	FW	NSSW SF-3A	1.2 / 1.2	P		4mm - 16mm
WI.P-015	136	All (-PG)	FW	NSSW SF-3A	1.2 / 1.2	P		5mm - 50mm
WI.P-022	136	All (-PG)	FW	Outershield 71E-H	1.2 / 1.2	P/T	≥ 100mm	P t ≥ 5mm / T t ≥ 5mm
Wi.P-026	136	PB	FW	SF-80A	1.2	P	≥500 (>150 PC- PF and PA rotated)	5mm - 30mm
WI.P-028	135	PB	FW	Hyundai SM-70	1.2	P/T	≥57	3mm - 22mm / 3mm - 24mm
Wi.P-029	135	PB	FW (sl & ml)	NST Carbomig 3N	1.2	P/T	≥40	3mm - 16mm / 3mm - 24mm
WI.P.-036-ML	136	PH	FW	Filarc PZ6113	1.2	P/T	≥36,5 (T)	P 3mm - 50mm T 3mm - 25mm
WI.P-036-SL	136	PH	FW	Filarc PZ6113	1.2	P/T	≥36,5 (T)	P 3mm - 50mm T 3mm - 25mm
136-BSC-2	136	All (-PG)	FW (s)	Hyundai SC-71LHM Cored	1.2 / 1.2	P		3mm - 24mm
LCR PA 8	136	PA	BW	Hyundai SC-71LHM Cored	1.2 / 1.2	P	≥500 (>150 PC- PF and PA rotated)	3mm - 16mm
LCR PB 8	136	All (-PG)	FW (s)	Hyundai SC-71LHM Cored	1.2 / 1.2	P		3mm - 16mm
LCR-FW-136	136	All (-PG)	FW (s)	Hyundai SC 71LHM Cored	1.2 / 1.2	P/T	≥ 50mm	P 3mm - 24mm / T 9mm - 36mm
F-2-12-PA-Ti52TFD	136	All (-PG)	FW (s)	Böhler Ti 52 T-FD	1.2 / 1.2	P		3mm - 24mm
2-12-PC+PF-Ti52TFD	136	All (-PG)	BW	Böhler Ti 52 T-FD	1.2 / 1.2	P	≥500 (>150 PC- PF and PA rotated)	3mm - 24mm
2-30-PA-Ti52TFD	136	All (-PG)	BW	Böhler Ti 52 T-FD	1.2 / 1.2	P	≥500 (>150 PC- PF and PA rotated)	15mm - 60mm
WI.P-036-ML	136	All (-PG)	FW	Filarc PZ6113	1.2 / 1.2	P/T	≥36,5 (T)	P 3mm - 50mm T 3mm - 25mm
WI.P-036-SL	136	All (-PG)	FW	Filarc PZ6113	1.2 / 1.2	P/T	≥36,5 (T)	P 3mm - 50mm T 3mm - 25mm
WI.P-038-FW-MR	136	All (-PG)	FW	Hyundai SC71LHM Cored	1.2 / 1.2	P/T	≥40	T 3mm - 16mm P 3mm - 24mm
WI.P-038-FW-MR	136	All (-PG)	FW	Hyundai SC71LHM Cored	1.2 / 1.2	P/T	≥40	T 3mm - 16mm P 3mm - 24mm

WELDING METHOD 111, MATERIAL GROUP 8.1

WPS No.	Methodology	Welding position	Connection	Additive material	Base material	P/T	Approval area for D	Approval range for material thicknesses
WI.A-001	131	PB	FW	Mig Weld Al 5356	22.3	P	≥500 (>150 PC- PF and PA rotated)	3mm - 12mm